Слайд 2
Many naturally occurring substances, such as clay, rocks, sand,
thatch and wood, even twigs and leaves, have been used
to construct buildings.
Слайд 3
Mud and clay
Clay based buildings usually come in
two distinct types. One being when the walls are
made directly with the mud mixture, and the other being walls built by stacking air-dried building blocks or bricks.
Other uses of clay in building is combined with straws to create light clay, wattle and daub, and mud plaster
Слайд 4
Stone or rock
Rock structures have existed for as
long as history can recall. It is the longest
lasting building material available, and is usually readily available. There are many types of rock throughout the world, all with differing attributes that make them better or worse for particular uses. Rock is a very dense material so it gives a lot of protection too; its main drawback as a material is its weight and awkwardness. Its
energdensity is also considered a big drawback, as stone is hard to keep warm without using large amounts of heating resources.
Слайд 5
Sand
Sand is used with cement, and
sometimes lime, to make mortar for masonry
work and plaster. Sand is also used as a part
of the concrete mix. An important low-cost building material in countries with high sand content soils is the Sandcrete block, which is weaker but cheaper than fired clay bricks.
Слайд 6
Thatch
Thatch is one of the oldest of building materials
known; grass is a good insulator and easily harvested.
Many African tribes have lived in homes made completely of grasses and sand year-round. In Europe, thatch roofs on homes were once prevalent but the material fell out of favor as industrialization and improved transport increased the availability of other materials. Today, though, the practice is undergoing a revival. In the Netherlands, for instance, many new buildings have thatched roofs with special ridge tiles on top.
Слайд 7
Wood and timber
Wood is a product of trees,
and sometimes other fibrous plants, used for construction purposes when cut
or pressed into lumber and timber, such as boards, planks and similar materials. It is a generic building material and is used in building just about any type of structure in most climates. Wood can be very flexible under loads, keeping strength while bending, and is incredibly strong when compressed vertically
The Gliwice Radio Tower (the second tallest wooden structure in the world) in Poland (2012).
Слайд 8
Apart from naturally occurring materials, many man-made products
are in use, some more and some less synthetic.
Слайд 9
Fired bricks and clay blocks
Bricks are made in a
similar way to mud-bricks except without the fibrous binder
such as straw and are fired ("burned" in a brick clamp or kiln) after they have air-dried to permanently harden them. Kiln fired clay bricks are a ceramic material. The individual bricks are placed upon each other in courses using mortar. Successive courses being used to build up walls, arches, and other architectural elements. Building with brick gained much popularity in the mid-18th century and 19th centuries. This was due to lower costs with increases in brick manufacturing and fire-safety in the ever crowding cities.
Слайд 10
Concrete
Cement bonded composites are made of hydrated cement paste
that binds wood, particles, or fibers to make pre-cast
building components. Various fiberous materials, including paper, fiberglass, and carbon-fiber have been used as binders
Falkirk Wheel
Слайд 11
Foam
Recently, synthetic polystyrene or polyurethane foam has been used in combination with
structural materials, such as concrete. It is lightweight, easily
shaped, and an excellent insulator. Foam is usually used as part of a structural insulated panel, wherein the foam is sandwiched between wood or cement or insulating concrete forms.
Слайд 12
Metal
Metal is used as structural framework for larger
buildings such as skyscrapers, or as an external surface covering.
There are many types of metals used for building. Metal figures quite prominently in prefabricated structures such as the Quonset hut, and can be seen used in most cosmopolitan cities. It requires a great deal of human labor to produce metal, especially in the large amounts needed for the building industries
Слайд 13
Plastics
The term "plastics" covers a range of synthetic
or semi-synthetic organic condensation or polymerization products that can be molded or extruded into
objects, films, or fibers. Their name is derived from the fact that in their semi-liquid state they are malleable, or have the property of plasticity. Plastics vary immensely in heat tolerance, hardness, and resiliency. Combined with this adaptability, the general uniformity of composition and lightness of plastics ensures their use in almost all industrial applications today.
Слайд 14
VOCABULARY
Timber -лесоматериалы
concrete - бетон
steel -
сталь
lime - известь
stone - камень
brick - кирпич
sand - писок
fine sаnd
- мелкий писок
mortar - минометр
plaster – штукатурка
metal – метал
plastics – пластик
foam – пена